Containment Liner Geomembrane

30 mil Liner

This 30 mil liner geomembrane is an excellent choice for either primary or secondary containment for a range of liquids including hydrocarbons, water, fresh water, and more. Made in a reliable 30 mil thickness, these liners have helped with lining of lagoons, ponds, lakes, and several other water bodies.

This 30 mil liner is made from a high strength XR-5 fabric (or a similar equivalent) that offers low temperature resistance and a high mullen burst strength for reliable containment of liquids. Our liners are typically sized based on the dimensions of your pond. Additional liners include fabrics that range from 12 mil to 60 mil.

Questions? We can help! Call our team at +1-772-646-0597 or fill out our quote request form to discuss your requirements.

Features:

Specifications
Thickness: 30 mil
Material: Typically Uses XR-5, Elvaloy, or Comparable Materials
High Resistance to Degrading
Superior Puncture and Tear Resistance
Low Thermal Expansion
Additional Fabrics Also Available

Benefits:

High Resistance to Chemicals
Equipped for Outdoor Exposure
High Puncture and Tear Resistance
Easy to Install
Sized to your Site's Requirements
Withstands Contact with Hydrocarbons

Containment Liner Application:

Lagoon Liners
Industrial Pond Liners
Oil Field Containment Liners
Construction Site Containment
Facility Lining

Containment Liner Geomembrane Technical Specifications
Fabric	Standard Value	Metric Value
Base Fabric Type ASTM D3776	Polyester
Base Fabric Weight (nominal) ASTM D3776	6.5 oz/yd2	220 g/m2
Thickness ASTM D751	30.0 mils min.	0.76 mm min.
Weight ASTM D751	30.0 ± 2 oz/yd2	1017 ± 70 g/m2
Tear Strength ASTM #D 1117, Trapezoid Tear	35/35 lbf min.	155/155 N min.
Breaking Yield Strength ASTM D751, Grab Tensile	550/550 lbf min.	2447/2447 N min.
Low Temperature ASTM D2136, 4 hr - 1/8" mandrel	Pass @ -30 º F	Pass @ -35 º C
Dimensional Stability ASTM D1204, 212º F - 1 hr	1.5% max. each direction
Adhesion - Heat Sealed Seam ASTM D751, Dielectric Weld	35 lbf/2 in min.	15 daN/5 cm min.
Dead Load - Seam Shear Strength ASTM D751	2 in seam, 4 hr, 1 in strip 210 lbf @ 70º F 105 lbf @ 160º F	5 cm seam, 4 hr, 2.5 cm strip 934 N @ 21º C 467 N @ 70º C
Bursting Strength ASTM D751 Ball Tip	650 lbf min. 800 lbf typical	2892 N min. 3560 N typical
Hydrostatic Resistance ASTM D751, Method A	800 psi min.	5.51 MPa min.
Blocking Resistance ASTM D751 (180º F/82º C)	# 2 Rating max.
Adhesion - Ply ASTM D413	15 lbf/in min. or Film Tearing Bond	13 daN/5 cm min. or Film Tearing Bond
Bonded Seam Strength ASTM D751 as modified by NSF 54	550 lbf min.	2447 N min.
Abrasion Resistance ASTM D3389 (H-18 Wheel, 1000 g load)	2000 cycles (min.) before fabric exposure 50 mg/100 cycles max weight loss
Weathering Resistance ASTM G23 (Carbon-Arc)	8,000 hrs (min.) - No appreciable changes or stiffening or cracking of coating
Water Absorption ASTM D471, Section 12, 7 days	0.025 kg/m2 max. @ 70º F/21º C 0.14 kg/m2 max. @ 212º F/100º C
Wicking Shelter-Rite® Procedure	1/8 in max.	0.3 cm max.
Puncture Resistance ASTM D4833	250 lbf min.	1112 N min.
Coefficient of Thermal Expansion/Contraction ASTM D696	8 x 10-6 in/in/ºF max.	1.4 x 10-5 cm/cm/ºC max.

Additional Liner Geomembrane Options

In addition to the 30 mil liner featured here, we also offer several containment liner fabrics including LLDPE, PVC, and Elvaloy materials. If you are looking for a specific fabric, thickness or weight, please do not hesitate to contact us or check out our complete variety of Secondary Containment Liners.

Customers Who Viewed This Liner Geomembrane Also Viewed:
HDPE Geomembrane Liners	Containment Liner	Liner-Geomembrane